Overview
120 tons that drives itself to the job.
The 120|HT is the flagship of Link-Belt’s telescopic truck line: a highway-legal 8×4 chassis that carries itself to the jobsite at up to 61 mph, then sets up on V-CALC outriggers to lift at full rated capacity. Its six-section boom telescopes to 164.1 ft, and with the three-piece 58 ft fly it reaches a 231 ft tip height.
Every function runs through Link-Belt Pulse 2.0, a 10-inch touchscreen operating system with an integrated rated capacity limiter, telematics, and Wi-Fi software updates. A Cummins X12 (445 hp) drives both the road and the crane functions through a ZF TraXon automated manual transmission.
Six-section boom
V-CALC outriggers
Pulse 2.0
8×4 highway chassis
61 mph travel
Why the 120|HT
Flagship capacity, road-ready.
Pulse 2.0 operating system
10-inch touchscreen with integrated RCL, anti-two-block, real-time load and radius, and Wi-Fi updates.
V-CALC outriggers
Variable confined-area lifting with live 360° charts, plus a front bumper outrigger for tight positioning.
8×4 highway chassis
A true truck crane that drives itself to the job at up to 61 mph, no trailer required.
Six-section boom
38.3 to 164.1 ft with six extend modes, reaching 231 ft with the full three-piece fly.
Telematics standard
Cellular location, usage, maintenance, and fault-code monitoring, so your fleet team sees the machine before it calls in.
Cummins X12
445 hp and 1,550 ft·lb of torque, run through a ZF TraXon 12-speed automated manual.
Specifications
The full technical picture.
Representative specifications for the Link-Belt 120|HT. Always refer to the in-cab Crane Rating Manual for allowable lifting capacities.
Lifting & Boom
| Maximum rated capacity | 120 US tons (110 mt) @ 7 ft |
| Main boom | 38.3 – 164.1 ft (11.7 – 50.0 m) |
| Boom sections | Six, pin & latch construction |
| Boom extend modes | Six (EM1–EM6) |
| Boom elevation | −3° to 80° |
| Max tip height (main boom) | 173 ft (52.6 m) |
| Max tip height (3-piece fly) | 231 ft (70.3 m) |
| Fly | 9.5 – 35 – 58 ft three-piece, offsettable 0–45° |
| Counterweight | Up to 36,500 lb, configurable |
Engine & Drivetrain
| Engine | Cummins X12, 6-cyl diesel |
| Rated power | 445 hp (339 kW) @ 1,600 rpm |
| Peak torque | 1,550 ft·lb (2,102 N·m) @ 1,200 rpm |
| Emissions | EPA 2021 (on-highway) |
| Transmission | ZF TraXon, 12F / 2R automated manual |
| Drive | 8×4 on/off-highway |
| Max travel speed | 61 mph (98 km/h) |
| Fuel tank | 95 gal (359.6 L) |
Carrier & Outriggers
| Carrier width | 8 ft 6 in (2.6 m) |
| Wheelbase | 23 ft 5.5 in (7.14 m) |
| Drive axles | Tandem steered (1&2), tandem driven (3&4) |
| Outriggers | Four single-stage + front bumper, V-CALC |
| Main jack reaction | 122,000 lb (543 kN) |
| Front bumper reaction | 40,000 lb (178 kN) |
Hydraulics & Tech
| Combined pump capacity | 168 gpm (635.9 L/min) |
| Hydraulic reservoir | 128 gal (484.5 L) |
| Operating system | Link-Belt Pulse 2.0, 10 in |
| Monitoring | Telematics + Wi-Fi updates |
⬇
120|HT Technical Data
Full specifications & capacity charts (PDF)
⬇
120|HT Brochure
Overview & feature highlights (PDF)
Questions, answered
Link-Belt 120|HT FAQ
How much can the Link-Belt 120|HT lift?
The Link-Belt 120|HT has a maximum rated capacity of 120 US tons (110 metric tons) at a 7-foot radius.
What is the maximum tip height of the 120|HT?
Maximum tip height is 173 ft on the main boom alone, and up to 231 ft with the three-piece 58 ft fly.
What engine powers the Link-Belt 120|HT?
A Cummins X12 six-cylinder diesel producing 445 hp (339 kW) at 1,600 rpm, paired with a ZF TraXon automated manual transmission.
How fast can the 120|HT travel on the highway?
The 120|HT is governed to approximately 61 mph in 12th gear, allowing it to drive itself between jobsites at highway speed.
How long is the main boom on the 120|HT?
The 120|HT uses a six-section pin-and-latch boom that extends from 38.3 ft to 164.1 ft, with six operator-selectable extend modes.
What is the difference between the 120|HT and the 120|HTLB?
They share the same carrier, cab, and Cummins X12 engine. The 120|HTLB (Long Boom) swaps in a seven-section boom that reaches 196.9 ft and up to 263 ft with fly attachments, versus the 120|HT’s six-section 164.1 ft boom.
Can I rent or buy a Link-Belt 120|HT from HOLT?
Yes. HOLT Crane & Equipment sells and rents the Link-Belt 120|HT across north, northeast, central, and west Texas, and southern New Mexico, backed by factory-trained service and genuine parts. Call 877-275-1520 for availability.
Put a 120|HT on your next lift.
Tell us the job and we’ll match the machine, for sale or rental, with the parts and service to keep it lifting.
San Antonio
Headquarters
5665 SE Loop 410
San Antonio, TX 78222Parts 210-444-8777
Irving
Dallas–Fort Worth metroplex
3131 State Hwy 161, Suite A
Irving, TX 75062Parts 972-721-6646
Send us a message
Tell us the job and we’ll get back to you shortly.
