Overview
120 tons on tracks, not tires.
The TCC-1200 steps up to a five-section formed boom that telescopes to 150 ft, riding on a crawler undercarriage that spreads its working weight across a wide track footprint. With the three-piece bi-fold fly configured, it reaches a 211 ft tip height, and five different fly lengths let you dial in exactly the reach a job calls for.
A Cummins QSL9 (320 hp) powers the crane through a two-speed travel system rated to 40 percent gradeability, while Link-Belt Pulse handles the rated capacity limiter, boom angle and radius readout, and cellular telematics.
Five-section boom
Five fly configurations
Link-Belt Pulse
Crawler undercarriage
Tilting cab
Why the TCC-1200
120-ton capacity, five ways to reach.
Link-Belt Pulse
Integrated rated capacity limiter, boom angle and radius readout, and cellular telematics for fleet monitoring.
Five fly configurations
From a 10 ft single-piece fly to a 10-31-55 ft three-piece bi-fold, all reaching up to a 211 ft tip height.
Tilting cab
A 0 to 20 degree tilting operator’s cab keeps the view on the load through steep boom angles.
CALC confined area capacities
Extended, intermediate, and retracted side frame configurations built into the Pulse display.
Teflon-lined boom wear pads
Self-lubricating wear pads on the five-section boom reduce daily grease points.
Telematics standard
Cellular location, usage, maintenance, and fault-code monitoring, so your fleet team sees the machine before it calls in.
Specifications
The full technical picture.
Representative specifications for the Link-Belt TCC-1200. Always refer to the in-cab Crane Rating Manual for allowable lifting capacities.
Lifting & Boom
| Maximum rated capacity | 240,000 lb (120 USt) @ 10 ft |
| Main boom | 40 – 150 ft (12.2 – 45.7 m) |
| Boom sections | Five, formed construction |
| Boom extend modes | Three (Standard, A-max1, A-max2) |
| Boom elevation | −2.5° to 80° |
| Max tip height (main boom) | 159 ft 6 in (48.6 m) |
| Max tip height (3-piece fly) | 211 ft (64.3 m) |
| Fly | Up to 10–31–55 ft three-piece bi-fold lattice, offset 2–45° |
| Counterweight | Up to 76,000 lb, “ABC+A” configuration |
Engine & Hydraulics
| Engine | Cummins QSL9, 6-cyl diesel |
| Rated power | 320 hp (239 kW) @ 1,800 rpm |
| Peak torque | 1,050 ft·lb (1,424 N·m) @ 1,500 rpm |
| Emissions | Tier 4f / Stage IV |
| Fuel tank | 110 gal (416 L) |
| Hydraulic reservoir | 250 gal (946 L) |
Undercarriage & Travel
| Track shoe width | 36 in (0.91 m) |
| Side frame gauge, extended | 15 ft 2.2 in (4.63 m) |
| Side frame gauge, retracted | 8 ft 11.6 in (2.73 m) |
| Overall undercarriage length | 23 ft 4.2 in (7.11 m) |
| Max travel speed | 2 mph (3.2 km/h) |
| Gradeability | 40% |
| Ground bearing pressure | 13.26 psi (0.93 kg/cm²), soft ground |
Winch & Tech
| Drum diameter | 15 in (38.1 cm) |
| Main rope length | 850 ft (259.1 m) |
| Wire rope | 7/8 in |
| Max line pull | 22,380 lb, layer 1 |
| Swing speed | 1.6 rpm, 360° continuous |
| Operating system | Link-Belt Pulse |
| Transport weight | 89,000 lb (40,370 kg) |
⬇
TCC-1200 Technical Data
Full specifications & capacity charts (PDF)
↗
TCC-1200 Official Page
Full details at linkbelt.com
Questions, answered
Link-Belt TCC-1200 FAQ
How much can the Link-Belt TCC-1200 lift?
The Link-Belt TCC-1200 has a maximum rated capacity of 240,000 lb, 120 US tons, at a 10-foot radius.
What is the maximum tip height of the TCC-1200?
Maximum tip height is 159 ft 6 in on the main boom alone in standard mode, and up to 211 ft with the three-piece bi-fold lattice fly.
What engine powers the Link-Belt TCC-1200?
A Cummins QSL9 six-cylinder diesel producing 320 hp (239 kW) at 1,800 rpm.
How long is the main boom on the TCC-1200?
The TCC-1200 uses a five-section formed boom that extends from 40 ft to 150 ft, with three operator-selectable extend modes.
What fly options does the TCC-1200 offer?
Five lattice fly configurations are available, from a 10 ft single-piece fly up to a 10 to 31 to 55 ft three-piece bi-fold fly reaching a 211 ft maximum tip height, all offsettable to 2, 15, 30, or 45 degrees.
Can I rent or buy a Link-Belt TCC-1200 from HOLT?
Yes. HOLT Crane & Equipment sells and rents the Link-Belt TCC-1200 across north, northeast, central, and west Texas, and southern New Mexico, backed by factory-trained service and genuine parts. Call 877-275-1520 for availability.
Put a TCC-1200 on your next lift.
Tell us the job and we’ll match the machine, for sale or rental, with the parts and service to keep it lifting.
San Antonio
Headquarters
5665 SE Loop 410
San Antonio, TX 78222Parts 210-444-8777
Irving
Dallas–Fort Worth metroplex
3131 State Hwy 161, Suite A
Irving, TX 75062Parts 972-721-6646
Send us a message
Tell us the job and we’ll get back to you shortly.
